Specifications for E805

EQUIPPED WITH:
Rise and Fall Head Travel
Hydramech Table Drive
Arbor Support and Arbor
Flame Hardened & Ground Square Gibbed Table Ways
Pendant Controls w/Spindle Load Meter
Table Feed Selector Dial - Set Of Change Gears

CATALOGUE SPECIFICATIONS:
Table Dimensions (Overall) W x L............. 22" x 72"
Table Working Surface, W x L.................. 22" x 72"
Table Longitudinal Travel (X-Axis)............ 48"
Spindle-Head Vertical Travel (Y-Axis)...... 10"
Quill Cross Adjustment (Z-Axis)................ 6"
Horizontal-Spindle C/L to Table, Min......... 6"
Horizontal-Spindle C/L to Table, Max........ 16"
Table-Center to Spindle-Face, Minimum.... 7.5"
Table-Center to Spindle-Face, Maximum... 13.5"
Spindle Nose Diameter............................... 5.06"
Spindle Taper............................................. #50 NSTD
(16) Spindle Speeds, Range........................ 30 to 1200 RPM
Longitudinal Table Feeds, Range................ 1 to 150 IPM
Power Rapid Table Traverse...................... 300 IPM
(1)Spindle Motor, Horsepower................... 30 HP
Floor Space Required, L x D...................... 11'4" x 7'5"
Overall Height............................................. 7'8"
Weight, Approximately............................... 18000 LBS

PRICE: F.O.B. Cleveland OHIO warehouse..... $37500.00

Don't let these 2 Straight Side DANLY & CLEARING large Bed stamping presses get away. These have full Cushions, front to rear Bolsters, PLC controls, and more.... all meeting OSHA safety requirements. Power on inspections arranged. CLICK HERE for details

900 to 1000 ton Used Straight-side large Bed Mechanical Presses for sale
Danly Model S4-1000 QDC 204x102 and Clearing Model F-4-900-QDC 200x100 bed

Back to E805 listing page

all rights reserved by Paramount Industries -08/21/12

site designs by webmaster Image Marketing Services